Omni Pro Electronics offers Adam Tech ultra-high speed HDMI 2.1 connector/cable assemblies. The contact resistance is 30mohm, the insulation resistance is 100mOhm, and the dielectric voltage is 300VAC. The 26AWG dual-end male to male cable comes in lengths of 3 ft, 6 ft, 10 ft and 16.5 ft with hdMI-A 2.1 plug. All components must be 100% tested for short circuit, openness, continuity and appearance.
Guerrilla RF has released the GRF3012 and GRF3016, each consisting of multiple octaves and extending the frequency range from near DC to 12GHz, with overall coverage extending to HF, VHF, UHF, L, S, C and X bands. When operating at 5GHz, the GRF3012 absorbs only 22mA current, but provides 11dB gain, 18dBm OIP3 linearity, 5dBm compression level and 5dB noise value. Both components are available in pin compatible 1.5mm x 1.5mm, 6-pin DFN package.
According to the needs of chips, market research has been carried out on some brands to meet the needs of users to understand the chip market, so as to quickly stock up
The two-stage SR switch is a two-stage combinational IC that combines an N-channel MOSFET with a drive circuit for synchronous rectification. The unit can be charged by the internal PLR at low system output voltage and provides a wide output operating voltage of 3.3V to 24V. The facility is a lead - and RoHS compliant, halogen - and antimony - free "green" facility.
EMITE and Anritsu have announced their latest combined solution. The Amritsu Wireless connection tester MT8862A, radio communication analyzer MT8821C and Bluetooth tester MT8852B have been integrated with the EMITE E600 reverberation chamber. By providing the ability to test and implement the latest standards, EMITE and Anritsu ensure that customers and service providers can provide fully compatible solutions to the market.
The WPC published the Qi 1.3 specification with extended power configuration to ensure high quality wireless charging power transmitters. The Qi 1.3 specification now requires the addition of a secure storage subsystem with a secure key supply (including X.509 certificates) to cryptographically verify the origin and quality of an authenticated power transmitter. It is a one-stop shop for Qi 1.3 solutions by providing a complete certification reference design, including application MCU, Qi 1.3 software stack, secure storage subsystem,
Ranovus offers a protocol independent Odin 100G optical I/O core based on GF Fotonix, GlobalFoundries' recently announced next-generation, widely disruptive monolithic platform. And IP cores may integrate with switches, processors, and storage devices to allow new data center architectures for machine learning, artificial intelligence, metaworld, cloud, 5G communications, and defense and aerospace.
Keyence extends its portfolio of precision measurement technologies with a new high-precision image size measurement system. Delivering accuracy of ±0.7μm, this series combines range-related ease of use with ground-breaking accuracy requirements for an increasingly wide range of applications. It can operate with just one button and measure up to 300 dimensions simultaneously, while the series can measure up to 100 individual components simultaneously.
Alpha and Omega Semiconductor Limited (AOS) has released AOZ32034AQV, a device packaged in a thermal enhanced QFN 4 x 4 package, The device was created for wireless charging applications in charging stations, vacuum cleaners, drones, wireless power tools, and other consumer electronics devices. The device offers a power rating of up to 50W over the family's previous device, the AOZ32033AQI, ideal for 30W applications.
Review Display Systems has introduced a highly versatile USB control and monitoring interface board. The board provides a universal 16-bit Texas Instruments MSP430 MCU that allows the user to fully control and query all onboard INPUT/output ports, interfaces, and sensors. A typical solution consists of three separate elements in which monitoring, analysis and control systems are combined to provide practical, efficient digital intelligence.
Renesas Electronics provides industry-leading functional safety solutions that meet the IEC 61508 standard for its RA and RX family of microcontrollers. Functional safety is a key consideration in many industrial automation devices, and it is becoming increasingly important in many other applications, including service robotics, medical and building automation. Its experts help customers get to market faster by providing end-to-end support for the 32-bit MCU family from concept to commercialization.
Onsemi offers the latest mixed signal controllers dedicated to bridging TP PFC topologies and NCP1681 for ultra high density offline power supplies. It can be configured to operate at fixed frequency CCM or multi-mode operation, where the controller naturally switches between CCM and CrM for optimal performance across power levels. The new high-power TP PFC controller combines established control algorithms with novel elements to provide high performance and low cost TP PFC solutions
Mouser is sponsoring the 20th Annual Create The Future Design Competition, a global challenge for engineers and innovators to design the next big thing. The competition closes on July 1, 2022. The competition draws attention for product designs that help people, improve the quality of healthcare, or provide sustainable solutions.
Hyperstone has released its new S9 series SD and microSD memory card controllers. The controller's FlashXE ECC and hyReliability feature set ensure extended life, data integrity, and power failure safety for demanding applications in markets including industrial automation, networking, telecommunications, and medical devices. The security variant S9S provides hardware support for AES-128/256, public-key elliptic curve cryptography, TRNG/DRBG and SHA-256 hases, and GPIO pin ISO7816, I2C and SPI interfaces.
TDK has introduced 1.5W and 3W models in the TDK-Lambda CCG series DC-DC converters, which can achieve full load convection cooling at ambient temperatures from -40 ° C to +85 ° C. All voltage and output power combinations are available in 4.5V to 18V, 9V to 36V or 18VDC to 76VDC inputs. Converters share a common plastic housing and measure 15.7 mm (l)x 10.4 mm (W)x 11.5 mm (H). The full temperature range is -40 ° C to +100 ° C, derating above 85 ° C.
ROHM Semiconductor corporation has announced that Lucid is using its SiC MOSFET in the breakthrough Lucid Air. The enhanced performance of ROHM's SCT3040K and SCT3080K SiC MOSFEts at high frequencies and high temperatures helps Lucid reduce design size and reduce power losses for high charging efficiency. Lucid Air was named car Trend of the Year 2022. An independent article by Insideev confirms its ability to charge.
The MP2733 Battery Charger Management Device is a highly integrated switch mode battery charger management device for single-cell lithium ion or lithium polymer batteries. These devices start and complete charging cycles without software control. Provides a low-impedance power path that optimizes efficiency, reduces battery charge time, extends battery life, and provides a variety of safety features for battery charging and system operation, including charging safety timer, battery temperature monitoring, OVP and OCP.
In the RSH2 series, RECOM added a fully tuned, low noise and isolated 2W version to its DC-DC converter portfolio. It can output 3.3V, 5V, 12V, 15V or 24V. The series products have no derating function at -40C ~ 85C temperature, and meet roHS-2 standard.
