IL4116, IL4117 and IL4118 consist of AlGaAs IRLED optically coupled to a photosensitive zero-cross thyristor network. The thyristor consists of two monolithic thyristors in parallel in reverse. The three semiconductor devices are assembled in a six-pin 300 mil dual-in-line package. It also separates low-voltage logic from 120 VAC, 240 VAC and 380 VAC lines to control resistive, inductive or capacitive loads including motors, solenoids, high-current thyristors or thyristors and relays. Applications include solid-state relays, industrial controls, office equipment, and consumer appliances.
Vishay Intertechnolog has introduced two new seventh generation 1200V FRED Pt Hyperfast recovery rectiators -VS E7MH0112-M3 and VS-E7MH0112Hm3. These two 1 A rectifiers are packaged in SMA (DO-214AC) package, with reverse recovery charge (Qrr) and forward voltage drop reaching the advanced level of similar devices
Vishay Intertechnology has announced the launch of four new electronic fuses in small 3 mm x 3 mm TDFN packages with adjustable current Limit and overvoltage Protection (OVP) features -SiP32433A/B and SiP32434A/B. 3.5 A SiP32433A/B and 6 A SiP32434A/B operate in the input voltage range of 2.8V to 23 V -- up to 28 VIN DC -- integrating multiple control and protection functions, simplifying the design and reducing the need for external components
The SiP21106 BiCMOS 150 mA low noise LDO voltage regulators are the perfect choice for low battery operated low powered applications. An ultra low ground current and low dropout voltage of 135 mV at 150 mA load helps to extend battery life for portable electronics. Systems requiring a quiet voltage source, such as RF applications, will benefit from the SiP21106 low output noise.
The IL410 and IL4108 consists of a GaAs IRLED optically coupled to a photosensitive zero crossing TRIAC network. The TRIAC consists of two inverse parallel connected monolithic SCRs. These three semiconductors are assembled in a six pin dual in-line package
HFA08TA60CS is a state of the art center tap ultrafast recovery diode. Employing the latest in epitaxial construction and advanced processing techniques it features a superb combination of characteristics which result in performance which is unsurpassed by any rectifier previously available.
The DG9636 is a CMOS, dual SPDT analog switch designed to operate from 2.7V to 12V, single supply. All control logic inputs have a guaranteed 1.65 V logic HIGH threshold when operation from a 12 V power supply. This makes the DG9636 ideally suited to interface directly with low voltage micro-processor control signals
Vishay Intertechnology announced the launch of a new series of screw joint aluminum electrolytic capacitors ---- 202 PML-ST, which is convenient for designers to store higher energy in a smaller space. The ripple current of the electrolytic capacitors is up to 49.6 A, the ESR is as low as 2 mW, and the service life is up to 10000 hours
Power MOSFET technology is the key to Vishay's advanced power MOSFET transistor production line. The efficient geometry and unique processing realization of this latest "art state" design: extremely low on state resistance combined with high transconductance; Superior reverse energy and diode recovery dV/dt capability. They are very suitable for applications requiring limited heat dissipation, such as computers and peripherals, telecommunications equipment, dc to dc converters and a wide range of consumer products.
Vishay Intertechnology has announced the launch of the AEC-Q102 certified, industry-leading linear optical coupler, the VOA300. The Vishay Semiconductors VOA300 achieves an insulating voltage of 5300 Vrms and a response speed five times that of competing devices, while the typical transmission gain stability is improved to 0.005 %/C. The single-ended output provides design flexibility.
Vishay Intertechnology, Inc has released seven new MOSFET and diode power modules for onboard charger applications. Provided in various circuit configurations, the integrated solutions combine high efficiency fast body diode MOSFETs and SiC, FRED Pt, and MOAT diode technologies in the compact EMIPAK 1B package, offering patented PressFit pin locking technology.
Vishay Intertechnology, Inc, announced the launch of Vishay's first 19.0mm x 17.1mm x 7.0mm 6767 high temperature inductor with A current rating up to 155 A and in compliance with the AEC-Q200 standard. Suitable for applications such as automotive engine nacles and advanced driver assistance systems (ADAS), the DC internal resistance (DCR) is 50 percent lower than that of normal power inductors and is smaller in size than similar ferrite solutions.
Vishay Intertechnology has announced the expansion of its IHHP line of ultra-thin, high-current power inductors with the introduction of three small dimensions 0603, 0805 and 0806 - IHP-0603ZH-01, IHP-0805Zh-01 and IHP-0806Zh-01. Vishay Dale IHP-0603ZH-01, IHP-0805ZH-01 and IHP-0806ZH-01 feature low DCR, low core loss, and a maximum height of only 0.8
Vishay Intertechnology, Inc. announces the launch of a new resonant transformer, the MRTI5R5EZ, in a monomer package for transformers and integrated inductors for inductor-inductor-capacitor (LLC) applications. 5.5kW Vishay Custom Magnetics MRTI5R5EZ saves PCB space while simplifying layout, reducing required installation components, fully adjustable magnetization and leakage inductance, and small parasitic parameters.
Vishay announced the introduction of a new fourth generation 600 V EF series fast body diode MOSFET -- SiHK045N60EF, which uses a thin PowerPAK 10 x 12 package.
Vishay Intertechnology, Inc has released a new resonant transformer for inductor-inductor-capacitor (LLC) applications that provide the transformer and an integrated inductor in a single package. Created to save PCB space whilst simplifying layouts and lowering component mounting needs, the 5.5kW Vishay Custom Magnetics MRTI5R5EZ supplies fully tunable magnetising and leakage inductance with a minimal parasitic variation.
Vishay Intertechnology, Inc. has announced the availability of three small form-factor devices -- IHP-0603, 0805 and 0806 -- IHP-0603zh-01, IHP-0805zh-01 and IHP-0806zh-01. Expand its IHHP series of ultra-thin, high-current power inductors. Vishay Dale IHP-0603zh-01, IHP-0805zh-01, and IHP-0806zh-01 feature low DCR, low core loss, and a maximum height of only 0.8 mm for use in Internet of Things (IoT) devices and portable electronics, saving space and increasing efficiency.
Vishay Intertechnology, Inc. announced the launch of two new ceramic/quartz substrate UVC (short wavelength ultraviolet) light emitting diodes - VLMU35CR40-275-120 and VLMU35CR41-275-120, for sterilization in medical, industrial and consumer electronics applications. Vishay Semiconductors VLMU35CR40-275-120 and VLMU35CR41-275-120 provide higher light intensity than previous generation solutions while reducing cost, while being suitable for efficient disinfection and longer life.
