Mouser now has the EFR32FG23 Flex Gecko wireless SOC from Silicon Labs, which extends the range and power efficiency of multi-protocol sub-ghz connectivity for a wide range of industrial iot, smart city, building and home automation applications. The SOC is supported by a suite of development tools combined with the company's FG23 868MHz-915MHz +14dBm development kit
XMOS has launched the XVF3610 and XVF3615 voice processors, devices that offer industry-leading voice processing solutions in easy-to-integrate and cost effective packages. The device also integrates automatic audio reference delay calibration, a key capability for voice TV systems, expanding the range of devices and environments where voice interfaces can be implemented. The XVF3615 adds embedded Amazon wakeword processing to alexa-enabled single-pass systems, allowing manufacturers to offload wakeword processing from host SoC systems
The RS component introduces the RS PRO high-performance HMI display, which provides a 7-inch control panel screen that can be used as a standalone device, offering multiple communication ports, a smooth touch screen, and excellent communication stability. Its Cortex A8 processor is a high-performance, low-power 32-bit processor with a 7-inch color display that provides connectivity via USB and Ethernet, DDRIII 512MB of memory, and operating temperatures between -10C and 60C.
Esp32-s2 MINI module Universal 802.11b /g/ N Wi-Fi microcontroller module provides engineers with integrated, low power, high performance, single-core soCs in PCB and IPEX antenna configurations, providing secure and economical communication, Includes an Espressif ESP32-S2FH4 Xtensa SoC and a 240MHz LX7 CPU. Operating temperature range from -40℃ to +125℃
Robustel R3000 LG devices can access many types of Roller application nodes. LPWAN is an rf technology for low-cost, usually battery-powered terminal devices and sensors that support wired Ethernet and wireless 4G/3G/2G access to cloud platforms, primarily for data transfer between LoRaWAN nodes and cloud platforms. Up to 8 channels support/receive data simultaneously. It comes with RobustOS + SDK and TPH6700, optional enclosures
Anritsu Has introduced the rubidium signal generator family, which provides unprecedented low SSB phase noise at 10GHz and 10kHz biasing levels of -136DBC /Hz(typical) and -140DBC /Hz(measured). The device features built-in, field frequency and level calibration, Easy to access by touching buttons on the GUI interface, the device's AM, FM/PM and pulse modulation capabilities enable a wide range of complex analog modulation signals, and the device is mounted in a 3U case with a 7-inch touch screen on the front panel with a traditional keyboard/dial interface
COSEL Co, Ltd, has launched 1000W free air convection cooling power supply, AEA1000F series. The device layout is optimized for free air convection, making it ideal for devices operating in low noise environments. For low harmonic current distortion, the device uses active PFC, switching stage adopts LLC resonant topology, deploys the latest generation of power semiconductors, with typical efficiency of up to 95%, optimized convection cooling, It can operate in the ambient temperature range of -20℃ to +70℃
Schurter's Reflowable Thermal Switch, RTS, Compact SMD fuse protects power semiconductors to accurately and reliably interrupt circuits at pre-defined temperatures, the device is only 6.6mm x 8.8mm, and in rated voltages up to 60VDC, This can be prevented with continuous operating current up to 130A. The equipment uses the traditional reflow welding process, and the condition of the equipment is clear and immediately visible to the installation program
Metcase's UNIMET and Unimet-Plus desktops and portable instrument cases are now available in new versions. The new bezel of the enclosure now includes eight sections - four die-cast angles, two horizontal and two vertical extrusions. Other features common to both models include four non-slip rubber feet and a tilting/rotating handle that doubles as a table stand. The size is available in six sizes :UNIMET, 230mm x 190mm x 50mm to 350mm x 260mm x 150mm; Unimet-plus, 230mm x 193mm x 50mm to 350mm x 263mm x 150mm
Abaco Systems has released 1553Guard, a new security technology based on mil-STD-1553 systems that provides an additional layer of protection against cyber attacks. The solution protects the entire bus from a single device, reducing integration time and effort by bypassing the process of re-designing and re-validating existing LRU and modules through expensive and complex hardware and software.
Mouser, along with Analog Devices, Wurth Elektronik, and HARTING, now offers a new solution page for single-pair Ethernet (SPE) technology. SPE technology transmits high-performance data and power through a single wire pair to field-grade actuator devices and sensors. Analog Devices' new industrial Ethernet solution offers two flexible options: the ADIN1110 MAC PHY and the ADIN1100 PHY.
The Samtec mPower Ultra-Micro Power Connection System (currently supplied by Mouser) provides 18A power blade interconnections with a 2mm pitch. The system is a SET qualified product offering a 2mm pitch with a choice of 2 to 10 positions. The stack height is 5mm to 16mm, 18mm, or 20mm.
KIOXIA Europe now offers the 9.5mm XD6 series enterprise and Data Center Standard Shape Factor (EDSFF) E1, SSD designed to optimize system density, efficiency and management. Provides higher density, reliability, performance and thermal management. The series is powered by KIOXIA BiCS FLASH 3D FLASH with 1DWPD durability and NVMe 1.3c and PCIe 4.0 specifications with capacities of 1.92TB and 3.84TB, respectively. The capacity is 1.92TB and 3.84TB, respectively. A TCG-OPal 2.0 encryption option is also provided.
The central semiconductor CDCLD current regulator diode is now available from Mouser with current values ranging from 27.5mA to 575mA and maximum voltage range from 1.5V to 2V. The diode is packaged in an industry standard DPAK surface mount package that meets RoHS and REACH standards
The DSX1000 adds powerful measurement capabilities and usability upgrades to the device, making it a faster, more comprehensive detection solution. The microscope provides a range of easy-to-use advanced measurement features to make the system even more powerful. Automatic edge Detection provides in-plane and contour measurements, allowing users to easily measure features and defects during QA/QC inspections. When the analysis is complete, the new software allows users to export data to third party software
Posifa Technologies has released the PGS1000 series of MEMS thermal conductivity hydrogen sensors that detect hydrogen concentrations in the air by measuring changes in the thermal conductivity of gas mixtures. The series is based on its second generation heat-conducting molds and is suitable for hydrogen leak detection and monitoring in industrial processes, medical facilities and automotive fuel cells.
Variohm EuroSensor has released a new polyimide cased, high tolerance NTC thermistor. The new thermistor is based on a durable epoxy bead EB series package sensor. Its 1.27mm x 5mm diameter polyimide casing provides strong mechanical properties, high temperature stability and excellent chemical resistance, making it a material widely used in applications where durability is required. Operating temperature range :-40C ~ +90C and insulated wire - about 150mm long, 2 x 30AWG solid copper wire insulated with Kynar
RECOM now offers through-hole, 1/32 brick footprint, non-isolated DC-DC-RPMA-4.5 and RPMA-8.0 with 4.5A and 8A output ratings, respectively. Each unit comes in an industry standard open-shelf 1/32 brick format and measures 19.1mm x 23.4mm x 9.6mm, providing an ultra-compact solution for high-power operations
